Toyota 4runner 2009 Owner's Manual page 345

4RUNNER_U.book Page 348 Wednesday, July 30, 2008 3:00 PM
3-6. Other interior features
Test the operation of the HomeLink
programmed button. Check to see if the gate/device operates
correctly.
Repeat the steps above to program another device for each of
the remaining HomeLink
n Programming other devices
To program other devices such as home security systems, home
door locks or lighting, contact your authorized Toyota dealer for
assistance.
n Reprogramming a button
The individual HomeLink
reprogrammed. To reprogram a button, follow the programming
instructions.
Operating the HomeLink
Press the appropriate HomeLink
on the HomeLink
The HomeLink
if the button is held in.
Erasing the entire HomeLink
348
4RUNNER_U_(L/O_0808)
®
buttons.
®
buttons cannot be erased but can be
®
®
button. The HomeLink
®
transceiver should turn on.
®
continues to send a signal for a maximum of 20 seconds
®
memory (all three programs)
Press and hold down the 2 out-
side buttons for 20 seconds until
the indicator flashes.
®
by pressing the newly
®
indicator
If you sell your vehicle, be sure to
erase the programs stored in the
®
HomeLink memory.