Sharp Z-810 Service Manual page 71

www.freeservicemanuals.info
Main code Sub code
26 7
11
20
30 1
Machine conditions check
(Operation/procedure)
When this simulation is executed, the current set machine conditions are displayed.
Power voltage
100 V Auto density lamp
120 V Auto/Manual density lamp
200 V Auto/Manual/Photo density lamp
Version
SHARP
OEM
Copy speed
COPIES MADE display
(CPM)
8 CPM
10 CPM
Exposure adjustment value setting for OPC drum membrane decrease correction
(Operation/procedure)
When this simulation is executed, the currently set adjustment value for the OPC drum membrane decrease correc-
tion is displayed.
1. Set value: 0 ∼ 5
Set value
0 Without photoconductor drum membrane decrease correction
1 For every 3,000 copies, the copy lamp voltage is increased by 0.33V (0.66V in 200V series).
2 For every 3,000 copies, the copy lamp voltage is increased by 0.66V (1.32V in 200V series).
3 For every 3,000 copies, the copy lamp voltage is increased by 0.99V (1.98V in 200V series).
4 For every 3,000 copies, the copy lamp voltage is increased by 1.32V (2.64V in 200V series).
5 For every 3,000 copies, the copy lamp voltage is increased by 1.65V (3.30V in 200V series).
2. Default value: 8 CPM machine: 4/10 CPM machine: 3
3. OPC drum membrane decrease correction counter clear
Execution of Sim 24-7 will clear the counter.
Rear edge void selection
(Operation/procedure)
When this simulation is executed, the currently set rear edge void setting (the code number) is displayed.
Enter the code number corresponding to the desired setting, and press the COPY key to set it.
Code No. Rear edge void setting YES/NO
0 With rear edge void
1 Without rear edge void
Paper fed sensor, detector and the control circuit operation check
(Operation/procedure)
ON/OFF of the paper feed sensors and detectors can be monitored with the operation panel lamps.
Sensor name
Paper pass detector (PPD1)
Resist front detector (PPD2)
Paper exit detector (POD)
Published in Heiloo, Holland.
Content
Lighting lamp
Lighting lamp
None
JAM lamp ON
8
10
Content
Display lamp
Toner required indicator
Misfeed indicator
Drum replacement required indicator
10 – 5
1/11/16