Others - Sharp Z-810 Service Manual

www.freeservicemanuals.info
6
Remove three screws, and remove the socket unit.
7
Remove the five screws and the harness, and remove the drive
unit.
Drive unit
C. Assembly procedure
Reverse the disassembly procedure.
D. Note for assembly
1
Treat the wire neatly and eliminate pinching of the wire.
2
Do not mistake the transfer charger connector with the separation
electrode connector for insertion.
Socket unit
Transfer charger harness
Published in Heiloo, Holland.

7. Others

A. OC matt attachment procedure
1
Put the OC matt to the reference position as shown below and
remove the duplex tape.
2
Tilt down the OC cover, and attach the OC matt.
8 – 15
1/11/16
Duplex tape
Reference position