Advertisement
Available languages
Available languages
EnglisH
14
, The set time is shown on the display.
Note: The longer you keep the button pressed, the faster the time is put
forward or backward.
Note: You can also adjust the time while the appliance is operating.
Note: If you press the timer increase and decrease button briefly at the same
time, the time is reset to 00:00.
Tip: When you have become more familiar with the appliance and when you
want to prepare your own recipes, you can also use it without setting the
timer. In that case, the time starts counting up from zero and the appliance
continues to operate for 99 minutes or until you switch it off yourself. If you
press the pause button while cooking without setting the timer, the timer is
reset to 00:00.
4
Press the start/pause button to start the cooking process.
The time on the display is counted down (in minutes and seconds)
,
and the start/pause button flashes slowly to indicate that the
appliance is operating.
The appliance starts to heat up.
,
The stirrer starts rotating.
,
Note: If you want to switch off the stirrer to cook for instance potatoes or if
you want to steam, press the stirrer on/off button. To activate the stirrer again,
press the stirrer on/off button again.
Note: To deactivate the stirrer, press the stirrer on/off button right after you
switched on the appliance.
5
If you want to interrupt the cooking process, press the start/pause
button.
The start/pause button lights up continuously and the time on the
,
display stops counting down or up.
Note: If you did not set a cooking time, the display shows 00:00.
6
To resume the cooking process, press the start/pause button again.
The time on the display starts counting down or up again and the
,
start/pause button starts flashing again.
Note: If you did not set a cooking time, the display starts counting up from 0
again when you press the start/pause button.
Note: If you do not resume the cooking process within 10 minutes, the
appliance goes into standby mode. In this mode, the start/pause button flashes
every 10 seconds.
7
When the set time has elapsed, the appliance beeps and the start/
pause button lights up continuously. Press any button to stop the
beeping.
Advertisement
