Printing Multi-Language Pdfs; Troubleshooting; Solving Printing Problems - Lexmark T642 User Manual

Printing multi-language PDFs

Symptom
Some documents do not
print.

Solving printing problems

Symptom
The operator panel
display is blank or
displays only diamonds.
The message USB
device unsupported
appears when using a
USB device.
Jobs do not print.
Downloaded From ManualsPrinter.com Manuals

Troubleshooting

Cause Solution
The documents contain 1 Open the document you want to print in Adobe Acrobat.
unavailable fonts.
2 Click the printer icon.
3 Check the Print as image box.
4 Click OK.
Cause Solution
The printer self test Turn the printer off, wait about 10 seconds, and turn the printer
failed. back on.
If the Ready message does not appear, turn the printer off and call
for service.
The USB device you are For information regarding tested and approved USB flash memory
using may not be devices, see our Lexmark Web site at http://
supported or has an support.lexmark.com and click on KnowledgeBase to search
error. Only specific USB for Direct USB printing.
flash memory devices
are supported.
The printer is not ready Make sure Ready or Power Saver appears on the display before
to receive data. sending a job to print. Press
state.
The specified output bin Remove the stack of paper from the output bin, and then
is full. press
The specified tray is Load paper in the tray.
empty.
You are using the wrong • Verify you are using the printer driver associated with the
printer driver or are
printing to a file.
• If you are using a USB port, make sure you are running
Your MarkNet N8000 Verify that you have properly configured the printer for network
series internal print printing.
server is not set up
See the drivers CD or the Lexmark Web site for information.
properly or is not
connected properly.
You are using the wrong Make sure you are using a recommended interface cable.
interface cable, or the
Make sure the connection is secure.
cable is not securely
connected.
Printing multi-language PDFs
The Print dialog appears.
.
printer.
Windows 98/Me, Windows 2000, Windows XP, or
Windows Server 2003 and using a Windows 98/Me,
Windows 2000, Windows XP, or Windows Server 2003
compatible printer driver.
104
to return the printer to the Ready