Amplicomms powertel 46 User Manual page 25

G
ETTING STARTED
Connect the telephone cable supplied to the telephone socket and the jack on
the rear side of the telephone.
Important:
• Use only the telephone cable supplied with your telephone otherwise
your phone may not work.
The telephone can also be installed on a wall. You require two wall plugs and
the respective screws in order to fix the telephone on a wall.
Warning: Ensure that there are no cables or pipes etc. under the surface of
the wall where you want to drill the holes.
Drill two holes 83 mm apart, one over the other. Leave the screws sticking
approx. 5 mm out of the wall. Place the telephone on the receiver hooks on the
screws and pull it slightly downward. Feed the cable through the respective
cable channel.
Turn the receiver hook in the receiver cradle 180° so that the
receiver can be hooked in.
22
Helpline UK 0844 800 6503
(See page 32 for costs and hours of operation)