Sharp LC-26D7U Operation Manual page 66

Useful adjustment settings
For automatically adjusting the PC image.
Press MENU and the MENU screen displays.
Ordinarily you can easily adjust the picture as
necessary to change image position using Auto Sync.
In some cases, however, manual adjustment is needed
to optimize the image.
Press
~/~
to select "Setup".
Press MENU and the MENU screen displays.
Press ..
IT
to select "Auto Sync,", and then
press ENTER.
Press
~/~
to select "Setup".
Adjust when the image flickers with vertical
stripes.
Centers the image by moving it to the left
or right.
Centers the image by moving it up or
down.
Press ..
IT
to select the specific
adjustment item .
Press
~/~
to adjust the item to your
desired position.
Press ..
IT
to select "Fine Sync.", and then
press ENTER.
V-Pos.
Clock
H-Pos.
• For resetting all adjustment items to the factory preset
values, press
ia./T
to select "Reset", and then press
ENTER,
•
Press
~/~
to select "Yes", and then press
ENTER.
• Auto Sync. starts and "Now adjusting the
image" displays.
• When Auto Sync. is successful, "Completed" displays. If
not, Auto Sync. failed.
• Auto Sync. may fail even if "Completed" displays.
• Auto Sync. may fail if the computer image has low
resolution, has unclear (black) edges, or is moved while
executing Auto Sync.
• Be sure to connect the PC to the TV and switch it on before
starting Auto Sync.
Phase Adjust when characters have low contrast
or when the image flickers.
@-65