Sharp LC-26D7U Operation Manual page 57

Using.external equipment
Please use the INPUT 4 terminal when connecting HOMI equipment.
" ' - - - - - - 1 - - '
HOMI cable
(Commercially available)
HOMI equipment
Set whether or not to use
VIEW MODE based on
signal recognition,
including an HDMI signal.
Press ..
IT
to select the desired item and
press ENTER.
Press ..
IT
I
~/~
to select the desired setting
and press ENTER.
Auto View Enable/Disable
Dynamic Standard/ Select the signal amplitude
Range Out of Standard range. Normally, select
Standard.
Signal
Auto/RGB/YCbCr Select the signal type from
Type 4:4:4/YCbCr 4:2:2 an HDMI terminal. Unless
the image quality looks
obviously poor, select Auto.
Color Auto/ITU601/ Select the internal color
Matrix
ITU709 space conversion method
when an RGB signal is
input. Normally, select
Auto.
• Refer to your external equipment operation manual for
the signal type.
Press ~/~ to select "Option".
Press ..
IT
to select "HOMI Setup", and then
press ENTER.
Press MENU and the MENU screen displays.
To watch an HDMI equipment image, select
"INPUT4" from "INPUT SOURCE" menu
using INPUT on the remote control unit or
on the TV. (See page 66.)
@-56