Sharp LC-26D7U Operation Manual page 31

Watching TV (TV Guide On Screen)
New manual recording
Aside from setting recordings using the program
LISTINGS menus, you can also define the schedule of
recordings manually by following the steps below.
New manual reminder
Instead of setting a reminder from the program
LISTINGS, you can set a reminder manually for a
program that you want to watch or a recording you
have set.
Press
~/T
to select the program you want
to record. Press
~/T
to select the program you want
to set reminder.
Press MENU to display "Record Options".
Press MENU to display "Remind Options".
Set a date to remind
Set the external
device or antenna
source
Set a start time to
remind
Set an end time to
remind
Set a channel to
remind using 0-9
When this is set to
"yes", the TV will
automatically switch
on at the time the
reminder was set for.
• "Remind Options" screen displays.
Press
./T
to select "new manual reminder"
and then press ENTER.
• "Record Options" screen displays.
Press
~/T
to select "new manual recording"
and then press ENTER.
date Set a date to record
date
start Set a start time to
record
start
end Set an end time to
record
end
channel Set a channel to
record using 0-9
channel
input
analog/digital air/ Set the external
digital cable/input 1/ recording device or
input analog/digital air/
input 2/input 3 antenna source
digital cable/input 1/
recorder VCR/i.L1NK Select a recorder you
input 2/input 3
connected
power onTV yes/no
frequency once/weekly/dai Iy/oft Set the recording
cycle
Press ENTER to highlight "schedule
recording".
Press ENTER again to exit.
auto tune TV yes/no When this is set to
"yes", the channel will
be automatically
changed before the
reminder screen is
displayed.
frequency
once/weekly/daily/off Set the reminder cycle
• The program set to be manually recorded is listed by
channel number in the SCHEDULE.
Press ENTER to highlight "schedule
reminder".
Press ENTER again to exit.
• The program set to be manually reminded is listed by
channel number in the SCHEDULE.
@-30