Sharp LC-26D7U Operation Manual page 32

Watching TV (TV Guide On Screen)
off/on/auto-hide
Press ..
IT
to select "Change channel
display", and then press ENTER.
Press ENTER to display the "Grid Options"
screen.
Press ..
IT
I .....
/~
to set the following items.
Press ..
IT
to select "done", and then press
ENTER to exit.
channel
Repeat steps 1 to 3 in Changing system
settings.
• Depending on the channel currently being
received you may be able to select "service".
service
Air/Cable/cable box
tune channel
Set the channel number you want to display
position
Set the channel display position
This setting lets you edit channel information that
appears in LISTINGS.
You can set each function as follows:
1. Re-order the position the channel appears in
LISTINGS
2. Change the channel number
3. Switch a channel
• On - the channel is always displayed
• Off - the channel is never displayed
• Auto-Hide - the channel is only displayed when
program information is available
• If you want to change System settings, select
"No, repeat setup process" and then press
ENTER.
• If the setting details displayed on the screen is
correct, select "Yes, everything is correct", and
then press ENTER.
• If the channel lineup is incorrect, select "Yes,
but my channel lineup is incorrect", and then
press ENTER.
Press
T
to select "Change system settings".
Press ENTER to display the "Confirming
Your Settings" screen.
Press .....
/~
to select "SETUP" .
Press TV GUIDE and then press MENU.
Press ..
IT
to select "go to Service Bar" in
"Episode Options", and then press ENTER.
After you initially complete Guide Setup, you can make
changes to System settings in the "SETUP" screen.
@-31