Sharp LC-26D7U Operation Manual page 23

Watching TV (TV Guide On Screen)
Selecting the cable box brand name.
Press ..
IT
to select the cable box brand,
and then press ENTER.
• Press
~/T
to view more cable box brands.
Tune your cable box to channel 02.
Make sure to leave your cable box turned
on, and then press ENTER.
The TV Guide On Screen system will conduct
a series of tests and when the testing is
completed the next screen will be displayed
automatically.
Do not press any buttons while testing is in
progress.
Do you have an antenna connected to
your
TV?
Press ..
IT
to select "Yes" or "No", and then
press ENTER.
• If you select "Yes", go to the next step.
• If you selected "No" in step 3, you must connect
an antenna to your TV and select "Yes" to
receive a channel lineup and listings.
Are the settings correct?
Confirm the settings displayed on the screen
and press ..
IT
to select "Yes, end setup"
or "No, repeat setup process", and then
press ENTER.
Press ENTER to continue.
@-22
Is your cable box now tuned to channel
09?
Press ..
IT
to select "Yes", "No" or "Test this
code again", and then press ENTER.
• If you select "Yes", go to the next step.
• If you select "No", a different code is tested in
the previous screen.
• If you select "Test this code again", the same
code is tested again in the previous screen.
• Please do not use the CableCARD while using cable box.