Sharp LC-26D7U Operation Manual page 49

Basic adjustment settings
Press
J.fT
to select "Dolby Virtual", and
then press ENTER.
Press
~f~
to select "On", and then press
ENTER.
Press MENU and the MENU screen displays.
Press
~f~
to select "Audio".
You can enjoy the SURROUND 2ch stereo with Dolby
Pro Logic II technology.
VIRTUAL DOLBY DIGITAL is a technology certified by
Dolby Laboratories that creates a virtualized surround
sound experience from two speakers using Dolby Pro
Logic or Dolby Pro Logic II.
VIRTUAL DOLBY DIGITAL retains all the original
multichannel audio information and provides the
listener with the sensation of being surrounded by
additional speakers.
For stronger bass
For stronger treble
Decrease audio from Decrease audio from
the right speaker the left speaker
For weaker treble
For weaker bass
Press
~f~
to select "Audio".
Press
~f~
to adjust the item to your desired
position.
Press
J.fT
to select a specific adjustment
item.
Press MENU and the MENU screen displays.
Bass
Treble
Balance
You can adjust the sound quality to your preference
with the following settings.
• Audio menu is grayed out when Output Select is set to
"Variable" .
• "Balance", "Treble" and "Bass" are grayed out when Dolby
Virtual is set to "On".
• For resetting all adjustment items to factory preset values,
press ..
IT
to select "Reset", press ENTER, press
~/~
to select "Yes", and then press ENTER.
• You can choose Dolby Virtual by pressing D[]Virtual on
the remote control unit.
• Audio menu is grayed out when Output Select is set to
"Variable" .
• "Balance", "Treble" and "Bass" are grayed out when Dolby
Virtual is set to "On".
• For some discs, setup may be required on your DVD. In
this case, please refer to the operation manual of your
DVD player.
@-48