Sharp LC-26D7U Operation Manual page 24

Watching TV (TV Guide On Screen)
• If you select "Yes", go to the next step.
• If you select "No", a different code is tested in
the previous screen.
• If you select "Test this code again", the same
code is tested again in the previous screen.
Are the settings correct?
Confirm the settings displayed on the screen
and press
~/T
to select "Yes, end setup"
or "No, repeat setup process", and then
press ENTER.
Did your VCR stop playing?
Press
~/T
to select "Yes", "No" or "Test this
code again", and then press ENTER.
Press ENTER to complete the SETUP.
Press ENTER twice to watch TV.
• Up-to-date listings will begin loading over the next 24 hours
when your LCD-TV is powered off.(Do not unplug the AC cord.)
• It may take more than one day for all eight days of listings
to update. The guide will automatically receive updates
during the period when your LCD-TV is turned off.
• To receive your channel lineup and program listings, leave
your cable box on. Your VCR and LCD-TV should be turned
off overnight.(Do not unplug the AC cord.)
• To record a TV program, make sure your cable box is on.
Put a tape in your VCR, tune the device to the Line input,
then turn the VCR off. (Do not unplug the AC cord.)
• You must redo the TV Guide On Screen system setup if
you:
-Move your LCD-TV to a new ZIP or postal code
- Cancel cable service or change cable boxes
- Change your VCR brand or model
The TV Guide On Screen system will conduct
a series of tests and when the testing is
completed the next screen will be displayed
automatically.
Do not press any buttons while testing is in
progress.
• If you select "Yes", go to the next step.
• If you select "No", setup will end.
Selecting the VCR brand name.
Press
~/T
to select the VCR brand, and
then press ENTER.
Turn on your VCR and insert a tape, and then
play the media on the VCR. Then press
ENTER on the remote control of your TV.
This screen shows the correct way to connect
the G-LINK cable from the back of the TV to
the recording device. Make sure the G-LINK
cable is properly connected, and then press
ENTER.
Use TV Guide On Screen to control VCR?
Press
~/T
to select "Yes, setup VCR control"
or "No, end setup", and then press ENTER.
VCR setting
Connect a VCR to your TV and use the TV Guide On
Screen system's program listings to easily schedule
recordings. using the one-touch recording feature.
@-23