Perform Transmission Maintenance- All Models; Perform 30 Day Service - Genie GTH-1048 Service Manual

September 2014
A-6
Perform Transmission
Maintenance- All Models
Transmission specifications require that this
procedure be performed every 8 hours or daily,
whichever comes first.
Transmission oil level - check
Required maintenance procedures and additional
Transmission information is available in the
Dana T20000 Maintenance Manual
(Dana part number 0202) or the
ZF 4 WG-98 TC Maintenance Manual
(ZF part number 5872 134 002).
Dana T20000 Maintenance Manual
Genie part number
ZF 4 WG-98 TC Operating Manual
Genie part number
Part No. 123701
Section 3 • Scheduled Maintenance Procedures
A-7

Perform 30 Day Service

The 30 day maintenance procedure is a one-time
sequence of procedures to be performed after the
first 30 days or 40 hours of usage. After this
interval, refer to the maintenance checklists for
continued scheduled maintenance.
1 Perform the following maintenance procedures:
John Deere models:
· A-9
· B-5
· D-2
115025
Perkins and Deutz models:
· B-5
1258405
· D-2
GTH-1048 • GTH-1056
CHECKLIST A PROCEDURES
Perform Engine Maintenance -
John Deere Models
Inspect the Tires, Wheels and
Lug Nut Torque
Replace the Hydraulic Tank
Return Filter Element
Inspect the Tires, Wheels and
Lug Nut Torque
Replace the Hydraulic Tank
Return Filter Element
3 - 9