Chapter 6: Engineering Mode; Engineering Mode - Matrix S3X-02 Service Manual

6.1 USING ENGINEERING MODE
To enter Engineering Mode, hold the LEVEL UP and DOWN keys for 3-5 seconds until Manager appears on the middle LED display. Press the
LEVEL UP or DOWN key to scroll to Engineering. Press ENTER to go into Engineering Mode.
CUSTOM SETTING
Machine Type
Power Save Time
Pause Time
Serial Number
Sleep Time
Audio Source
Disable Errors
Speed Units
10

CHAPTER 6: ENGINEERING MODE

DEFAULT
S3x
30 Seconds
30 Seconds
N/A
Off
Off
No
Mile
OPTIONS
H3x, U3x, R3x, E3x, S3x, A3x
30-60 Seconds
15 - 120 Seconds
N/A
Off or On (1-30 Minutes)
Off / TV / PC TV / Remote TV
Yes or No
Mile or Kilometer
DESCRIPTION
The machine type should be the
S3x for the Stepper.
Power saving time for the self
powered frame.
For non self powered frames
only. Not used on this model.
Serial Number input is available
for both the Console and Frame.
Use the number keys and UP
/ DOWN LEVEL keys to enter
Engineering Mode. Due to the
limited LED characters, 2 layers
are used to enter the serial
number. First Layer:
- PPPPP V
- PPPPP is the product name.
- V is the version. If the
version is A, just leave this blank.
Second Layer
- YY MM nnnnn.
- YY is the year (11, 12).
- MM is the month (e.g. 08,
09, 10).
- nnnnn is the actual serial
number.
Use the UP / DOWN LEVEL keys
to navigate the layers and the
number keys to input the serial
number. The product name is
dependent on the Machine Type
setting.
For example, the console is
EP603 with ver. A and the
manufactured date is 2011.08
with 98765. The frame is CS11
with ver. A and the manufactured
date is 2011.06 with 12345. Their
serial numbers are:
Console SN: EP603 1rst layer,
110898765 2nd layer.
Frame SN: CS11 1rst layer,
110612345 2nd layer.
If there is no use of the machine
over a period of time, the console
LEDs will turn off (go into sleep
mode). This is for AC powered
units only.
Manual setting that sets which
outside TV will have audio
through the console audio ports.
No - Shows A-C class error
codes. Yes - Shows only C class
error codes.
Set for Mile or Kilometer.