Engineering Mode; Service Mode - Matrix S3x-01 Service Manual

CHApter 5: MANAger / eNgINeerINg / SerVICe MoDeS
5.2 eNgINeerINg MoDe oVerVIeW
1) Engineering mode is for factory settings only.
5.3 SerVICe MoDe oVerVIeW
1) To enter Service Mode, press & hold the UP and DOWN level keys at the same time for 3-5 seconds until Manager Mode appears on the
display.
2) Press the UP or DOWN level key until Service 1, 2, 3, or 4 appears on the display and press SELECT.
3) Press SELECT to modify the program settings once displayed.
4) Press the UP or DOWN level key to change the value.
5) Once the program setting is correct, press START to save.
6) Press START twice to exit Service Mode..
CUSTOM SETTINGS
Service 1
Service 2
Service 3
Service 4
DESCRIPTION
Display Test
Test Mode - Shows RPM Reading
Accumulated Distance / Accumulated Time
Heart Rate Test
11