Chapter 5: Manager Mode; Manager Mode - Matrix S3X-02 Service Manual

5.1 USING MANAGER MODE
The Manager's Custom Mode allows the club owner to customize
the stepper for the club.
1) To enter Manager Mode, press and hold down the UP and
DOWN LEVEL keys. Continue to hold down these two keys until
the display reads Manager Mode and hit ENTER (Figure A).
2) To scroll through the list of options in Manager Mode, use the
UP and DOWN LEVEL keys. Each of the custom settings will show
on the display.
3) To select a custom setting, press the ENTER key when the
desired setting is shown.
4) To change the value of the setting, use the UP and DOWN
LEVEL keys.
5) To confirm and save the value of the setting, press the ENTER
key.
6) To exit the setting without saving, press the BACK key.
7) Press and hold the STOP key for 3-5 seconds to return to nor-
mal operation.
5.2 MANAGER MODE OVERVIEW
CUSTOM SETTING DEFAULT MINIMUM MAXIMUM
Maximum Time 60 min
Default Time 30 min
Default Age 30
Default User Weight 150 lbs /
68 kg
Accumulated Distance N/A
Accumulated Time N/A
Software Version N/A
Sound Mode On
Out of Order Off
Gender Male
Language English
Speed / Distance Mode Mile
Default Level 1

CHAPTER 5: MANAGER MODE

5 min 99 min
5 min Maximum Time
Setting
10 100
60 lbs / 27 400 lbs / 182
kg kg
0 99,999 Miles
0 999,999 hours
N/A N/A
On Off
On Off
Male Female
English English
Mile Kilometer
1 20
FIGURE A
DESCRIPTION
Sets the total run time of any program.
Workout time when GO is pressed or when no time is selected
during program set up.
Starting age when GO is pressed or when no age is selected
during program set up.
Weight used for program calorie expenditure calculations.
Total distance for all programs.
Total time for all programs displayed in hours.
Current version of console software. Also able to check LCB
and radio versions if needed.
Turns the chime on / off when a button is pressed.
Locks the machine when out of order.
Determines the gender of the user when not selected during
program set up.
Sets the language for the console. Select between English,
Spanish, German, French, Italian, Portuguese, Finnish,
Japanese, Swedish, and Dutch.
Displays distance in miles or kilometers.
Starting resistance when GO is pressed or when no resistance
is selected during program set up.
9