Installing The Module - HP J3138A Installation Manual

Installing the HP AdvanceStack Internet Router

Installing the Module

Installing the Module
The HP AdvanceStack Internet Router module can be installed in any HP
AdvanceStack host device such as hubs or switches with an Expansion Slot.
Expansion Slot is the official name for the slot in an HP AdvanceStack host
device which can take an add-on module such as this router module.
N O T E
Static electricity can severely damage sensitive electronic components on the
router module. While handling the router module and installing it in the host
device, follow these procedures to avoid damage from static electricity:
To install the module into the host device, follow these steps:
1.
2-8
Handle the module by its faceplate, and avoid touching the components
and circuitry on the boards.
Equalize any static charge difference between your body and the host
device either by wearing a grounded wrist strap and attaching it to the
host device chassis, or by frequently touching the host device chassis
while you are installing the module.
Turn off the power. Remove the Expansion Slot Cover Plate.