Table of Contents
Advertisement
6.SETTING ITEMS
3
Set each setting item, and then press [OK].
Press
or
RESOLUTION
Set the resolution based on the fineness of the original.
STANDARD:
FINE:
U-FINE:
If the recipient's fax machine is not capable of receiving originals at the same resolution, the resolution is
automatically converted before being sent it to the recipient. The higher the resolution is, the longer it takes to
send an original.
ORIGINAL MODE
Set the scanning mode based on the type of the original.
TEXT:
TEXT/PHOTO:
PHOTO:
In the TEXT/PHOTO mode or PHOTO mode, transmission time may be longer than in the TEXT mode.
TX TYPE
Set the fax transmission mode.
MEMORY TX:
DIRECT TX:
to switch the pages.
This is suitable for an original with regular size text.
This is suitable for an original with small size text and detailed illustrations.
This is suitable for an original with ultra-detailed illustrations.
This is suitable for an original with text and line drawings.
This is suitable for an original with a mixture of text and photos.
This is suitable for an original with photos.
Send the original after the scanned data are saved in the memory. Up to 100 transmissions of
up to 1000 pages per 1 transmission can be reserved, or up to 50 transmissions when the hard
disk is not installed.
Send the original directly as it is being scanned. Once a page has been scanned and sent, the
next page is scanned and sent. Therefore, it takes longer to scan and send all pages. However,
you can confirm on the fly that each page is sent to the recipient.
6 SETTING ITEMS
User Settings
95
Advertisement
Table of Contents
