Table of Contents
Advertisement
1 BEFORE USING FAX
Description of Each Component
Control panel
This section describes the buttons on the control panel used for the fax functions. For any details of the control panel not
covered in this document, refer to the Quick Start Guide.
e-STUDIO2550C Series / e-STUDIO2551C Series
1. [FAX] button
Use this button to display the fax screen when you use the fax function.
When you use the Internet Fax function, you also press this button. For details of the Internet Fax function, refer to
the Scanning Guide.
2. [USER FUNCTIONS] button
Use this button when you register/make settings such as initial setting for the fax function.
3. Digital keys
Use these keys to enter fax numbers, etc.
4. [FUNCTION CLEAR] button
Use this button to clear all current selected functions and return to the default settings.
5. [STOP] button
Use this button to stop any scanning in progress.
6. [START] button
Use this button to start scanning a document for fax transmission.
7. [CLEAR] button
Use this button to cancel entered numbers.
8. Alarm lamp
This lamp lights when an error occurs and this equipment needs some actions to be taken.
9. PRINT DATA lamp
This lamp lights when there is a received SECURE RECEIVE fax job.
10. [PRINT] button
Use this button to print a SECURE RECEIVE fax job.
11. MEMORY RX
This lamp lights when there is a received fax which is not printed yet and its data are still in the memory.
12. Touch panel
P.13 "Touch panel"
12
Description of Each Component
1
12
11
2
10 9
8
7
3
4
5
6
Advertisement
Table of Contents
