Setting 2Nd Line For Fax Unit - Toshiba GD-1320 Operator's Manual For Fax Unit

6.SETTING ITEMS

Setting 2nd Line for FAX Unit

You can make settings so that two lines can be used at the same time using the 2nd Line for FAX Unit installed. In addition
to the settings described below, you need to:
Register the terminal ID.
P.99 "Registering the terminal ID"
Set the dial type.
P.100 "Setting the initial setup"
1
Press [LINE-2 MODE].
2
Set how you want to use the 2nd line, and then press [OK].
TX / RX
The 2nd line is used for both transmission and reception.
RX ONLY (24HR)
The 2nd line is used only for reception.
RX ONLY (TIMER)
The 2nd line is used only for reception during a specified period of time. To move the cursor, use
Specify the time period on a 24-hour basis using the digital keys on the control panel.
The automatic reception is only available for the 2nd line.
6 SETTING ITEMS
or .
Administrator Settings 105