Checking The Engine-Oil Level - Toro Workman HD 07369 Operator's Manual

Utility vehicle with bed
Hide thumbs Also See for Workman HD 07369:
Table of Contents

Advertisement

1. Cargo-box lever
Lowering the Box
WARNING
The weight of the box may be heavy. Hands or
other body parts could be crushed.
Keep hands and other body parts clear when
lowering the box.
Move the lever forward to lower the cargo box
Opening the Tailgate
1. Ensure that the cargo box is lowered completely.
2. Open the latches on the left and right side of the cargo
box and lower the tailgate
Figure 10
(Figure
(Figure
11).
1. Latch handle
2. Latch gate

Checking the Engine-Oil Level

10).
Service Interval: Before each use or daily
Engine-oil type: Detergent engine oil API SJ or higher
Engine-oil viscosity: 10W-30; Choose an engine-oil
viscosity according to the ambient-air temperature to the
table in
Figure
The engine is shipped with oil in the crankcase; however, you
should check the oil level before and after the engine is first
started.
Note: The best time to check the engine oil is when the
engine is cool before it has been started for the day. If it has
already ran, allow the oil to drain back down to the sump
for at least 10 minutes before checking. If the oil level is at
or below the Add mark on the dipstick, add oil to bring the
20
Figure 11
3. Latch pin
12.
Figure 12

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents