Advertisement
Quick Links
ORDERING REPLACEMENT PARTS
To order replacement parts, contact the ICON Health & Fitness Ltd. office, or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4, Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
Tel:
08457 089 009
Outside the UK: 0 (044) 113 387 7133
Fax: 0 (044) 113 387 7125
To help us assist you, please be prepared to give the following information:
• the MODEL NUMBER of the product (WLEVEL28010)
• the NAME of the product (WESLO
®
GLIDER III elliptical trainer)
• the SERIAL NUMBER of the product (see the front cover of this manual)
• the KEY NUMBER and DESCRIPTION of the part(s) (see page 14)
Part No. 183235 R0702A
Printed in China © 2002 ICON Health & Fitness, Inc.
Model No. WLEVEL28010
Serial No.
Serial
Number
Decal
QUESTIONS?
As a manufacturer, we are
committed to providing com-
plete customer satisfaction. If
you have questions, or if there
are missing or damaged parts,
please call:
08457 089 009
Or write:
ICON Health & Fitness, Ltd.
Customer Service Department
Unit 4
Revie Road Industrial Estate
Revie Road
Beeston
Leeds, LS118JG
UK
email: csuk@iconeurope.com
CAUTION
Read all precautions and
instructions in this manual
before using this equipment.
Keep this manual for future
reference.
USER'S MANUAL
Visit our website at
www.iconeurope.com
Advertisement
Related Manuals for Weslo WLEVEL28010
Summary of Contents for Weslo WLEVEL28010
- Page 1 Fax: 0 (044) 113 387 7125 Serial To help us assist you, please be prepared to give the following information: Number Decal • the MODEL NUMBER of the product (WLEVEL28010) • the NAME of the product (WESLO ® GLIDER III elliptical trainer) QUESTIONS? •...
- Page 2 HOW TO ORDER REPLACEMENT PARTS ......... . .Back Cover 35 36 WESLO is a registered trademark of ICON Health & Fitness, Inc.
- Page 3 PART LIST—Model No. WLEVEL28010 R0702A IMPORTANT PRECAUTIONS Key No. Qty. Description Key No. Qty. Description WARNING: To reduce the risk of serious injury, read the following important precau- Frame Large Axle Cap tions before using the WESLO ® GLIDER III elliptical trainer.
-
Page 4: Before You Begin
Stand with your knees bent slightly and slowly bend forward from your and ankles. And the unique GLIDER III features number is WLEVEL28010. The serial number can be hips. Allow your back and shoulders to relax as you reach down... -
Page 5: Conditioning Guidelines
CONDITIONING GUIDELINES ASSEMBLY Assembly requires two people. Place all parts of the elliptical trainer in a cleared area and remove the packing During the first few minutes of exercise, your body materials. Do not dispose of the packing materials until assembly is completed. WARNING: uses easily accessible carbohydrate calories for ener- gy. - Page 6 2. Insert the Lower Cable (30) and the Reed Switch MAINTENANCE AND TROUBLESHOOTING Wire (35) together up through the Head Frame (2). Make sure the Wire Whilst another person lifts the front of the Frame (1) (35) and Cable (30) slightly, slide the Head Frame into the Frame;...
- Page 7 HOW TO OPERATE THE CONSOLE HOW TO USE THE PULSE SENSOR 5. Route both pulse wires up through the Upright (3) as shown. Note: The console requires two 1.5V batteries. See Note: Before using the pulse sensor, peel the pro- assembly step 6 on page 7 for battery installation tective vinyl covering off the metal contacts on Attach the T-bar (7) to the Upright (3) with four M6 x...
-
Page 8: How To Use The Elliptical Trainer
8. Identify the Left Handlebar (9), which is marked with a HOW TO USE THE ELLIPTICAL TRAINER sticker. Insert the Left Handlebar into the Left Handlebar Leg (11). Attach the Left Handlebar to the Left Handlebar Leg with two M8 x 36mm Button HOW TO EXERCISE ON THE ELLIPTICAL TRAINER DESCRIPTION OF THE CONSOLE Bolts (66) and two M8 Nylon Locknuts (67).