Leaving A Call Alert Page (Gp280 Radios Only); Call Alert Operation; Answering A Call Alert Page With A Group Call - Motorola GP240 User Manual

UG_240_280_EN.fm Page 26 Wednesday, August 14, 2002 10:30 AM
11. The radio will return to
the home display.
Note: Once engaged in a private conversation, if
the radio is left idle for more than one minute, a
momentary warning alert sounds every six
seconds to remind you that dispatch calls are not
being heard. After two minutes, a permanent
invalid mode tone sounds.
Leaving a Call Alert Page
(GP280 radios only)
1. If the party you want to have a Private Call
does not answer the call within twenty
seconds, you can choose to leave a Call Alert
page. This leaves your radio's ID
number with the called radio so you can be
called back later.
2. Press the PTT switch to send the Call Alert
page. You will hear five beeps, indicating that
the system has received your ID number and
the radio you are calling is on the air.
3. Press ..
Downloaded from www.Manualslib.com
PLANT POLICE
manuals search engine

CALL ALERT OPERATION

Answering a Call Alert Page with a Group
Call
1. Upon receiving a Call Alert page, four alert
tones sounds (repeats every 5 seconds).
2. The green LED lights and the Call Received
annunciator, F, blinks indicating a call is
received.
3. Press the PTT switch to answer the page.
4. The display shows the
current talkgroup. The
audible alert, LED and
call received annunciator
turns off.
5. The ID number of the radio that paged you is
stored as "the last ID number received."
6. Have your conversation in the normal manner;
all members of your talkgroup will hear your
response. Press the PTT switch to talk;
release the switch to listen.
FIRE DEPT