Programming The Call List - Motorola GP240 User Manual

UG_240_280_EN.fm Page 31 Wednesday, August 14, 2002 10:30 AM
try to add any more digits, you will hear an
invalid (bad) keypress alert tone.

Programming the Call List

This feature lets you use the radio's keypad to change
the radio ID numbers assigned to the call list used by
the trunked Private Conversation and Call Alert
features.
To change the call list radio ID numbers
1. Press / until PROG
is displayed.
2. Press l (the softkey
below PROG).
3. Press l (the softkey
below CALL). The
display shows the first
programmable member
of the call list.
4. Press / or ,,
Use the keypad to enter the desired member's
position number (1 to 19) to view the other
Downloaded from www.Manualslib.com
members of the call list.
DIR SCAN PROG
SCAN PHON CALL
CM NORTH
—or—
manuals search engine
5. When you stop on a
member of the list, the
display will alternate
between showing the
member's name and
radio ID number.
6. Press the select key to enter edit mode.
7. A short press would
enable the editing of the
radio ID. The display
shows the current mem-
ber's radio ID number.
8. A long press would
enable the editing of the
member's name. The
display shows the cur-
rent member's name.
9. Use any of the alphanumeric keys to make the
changes. The blinking cursor indicates the
position of the next number to be added.
10. When you have finished changing the number,
press the select key again. The change is
Alternates between
DK EAST
and
ID: 753951
ID: 753951
DK EAST