Motorola GP240 User Manual page 27

UG_240_280_EN.fm Page 23 Wednesday, August 14, 2002 10:30 AM
2. The green LED and call received status
annunciator, F
being received. You have 20 seconds to
answer the call before the radio automatically
returns to the home display.
3. Press the call response button or the call
button.
4. The display shows the
incoming caller's ID
number, and the call
received annunciator will
turn off.
5. After viewing the caller's ID number, you can
decide to either talk privately (go to next step),
or not answer the call by pressing the call
response or call button to return to the home
display.
6. If you decide to answer the call, press the PTT
switch.
7. The caller's ID number
remains displayed for the
duration of the call.
Downloaded from www.Manualslib.com
,
will blink indicating that a call is
ID: 722588
ID: 722588
manuals search engine
9. The radio will return to
the home display.
Note: If you press the PTT switch before you press
the call response button, the response will be
transmitted to everyone in the talkgroup (a
dispatch mode operation).
• After answering a Private Call, the caller's ID
number is stored in your radio as the "last ID
number received".
• If your radio is configured for Private Call II,
upon receiving a Private Conversation call, two
alert tones sounds, followed by the received
voice.
Making a Private Call
(GP280 radios only)
There are four phases in making a private call, namely
• initiating a private call,
• entering the desired radio ID number,
• sending the radio ID number, and
• having the conversation and hanging-up.
Initiating a Private Call
PLANT POLICE