Motorola GP240 User Manual page 28

UG_240_280_EN.fm Page 24 Wednesday, August 14, 2002 10:30 AM
3. The display shows the
last ID number transmit-
ted or received.
Entering the Desired Radio ID Number
If the last ID number called is the desired number, go
directly to step 5.
To enter a new number
4a. Enter the new six-digit ID number using the
keypad.
4b. On the display, the old ID number disappears
and the new digits appear as they are being
entered.
4c. The cursor flashes indicating the location of
the next number to be entered.
Note: Exactly six digits must be entered for the
radio ID number. If fewer than six digits were
entered, you will hear a bad-keypress tone and
the display will show "INVALID ENTRY" when
attempting to send the radio ID number. A bad-
keypress tone will also be heard if you try to
Downloaded from www.Manualslib.com
ID: 722588
manuals search engine
erased, and the cursor moves to the left. When
the last digit is erased, an additional press of this
key causes the last member of the pre-
programmed call list to be displayed; pressing
/ shows the first member of the list.
To enter a number from the call list
4a. Press either , or /.
4b. / takes you forward to the first or next
member of the list; , takes you backwards
to the last or previous member of the list.
4c. When at a member of
the list, the display alter-
nates between showing
the member's name and
ID number.
To enter a number from a location in the call list
4a. Press either , or / to enter the call
list.
4b. Enter the first digit of the location number. If
there are fewer than 10 members in the list,
go directly to step 4e.
Alternates between
JB SMITH
and
ID: 784116