Scan; Scan Operation; Turning Scan On Or Off With The Keypad (Gp280 Radios Only) - Motorola GP240 User Manual

UG_240_280_EN.fm Page 39 Wednesday, August 14, 2002 10:30 AM

SCAN

This section outlines the scan functions of your radio.
All references to what is shown on the display is only
valid forGP280 radios. Throughout this section, the
display below
is used to indicate the radio's home display.

SCAN OPERATION

The scan feature allows you to monitor activity on
different conventional or trunked modes by scanning a
scan list of modes. This list can be programmed with
the Customer Programming Software (CPS) or user
programmable.
The table below lists the types of scan operations
available depending on radio model.
Conventional
Talkgroup
Scan
Downloaded from www.Manualslib.com
Automatic scanning (autoscan) can be programmed
PLANT POLICE
Comprises conventional-only modes.
Comprises conventional modes and
trunked modes from more than one
trunking system.
manuals search engine
The radio will continue autoscanning until you select a
mode that does not have autoscan enabled.
Turning Scan On or OFF with the Keypad
(GP280 radios only)
Press / until
1.
SCAN is displayed.
Press ; (the soft-
2.
key below SCAN).
3. Press the softkey
below the desired
scan state (on or off).
The radio returns to
the home display.
PHON SCAN CALL
You will see the
current scan state
momentarily.
SCAN ON
or
SCAN OFF
Then
OFF
ON
PLANT POLICE