Remote Controller - Onkyo T T-4555 Instruction Manual

Remote Controller

Remote Controller
1
2
3
4
5
6
7
8
8
A
STANDBY/ON button (15)
Sets the T-4555 to On or Standby.
B
Number buttons (16, 23)
Used to select radio presets by number, and to enter
AM/FM station frequencies and DAB channel num-
bers in Direct Tuning mode.
9
C
DIRECT TUNING button (16)
J
Selects the Direct Tuning mode. With AM and FM,
you can select a station directly by entering its fre-
quency. Direct Tuning mode does not work with
K
DAB.
D
RETURN button (23)
Returns to the previous display.
L
E
Arrow [ ]/[ ]/[ ]/[ ] buttons (20, 21, 23, 24)
With AM and FM, the Up and Down [ ]/[ ] but-
tons are used for tuning. With DAB, the Up and
Down [ ]/[ ] buttons are used to select stations.
The Left and Right [ ]/[ ] buttons are not used by
the C-AMFM and C-DAB tuner boards.
M
F
PRESET [+]/[–] buttons (22)
N
Used to select radio presets.
G
AUTO SCAN button (19, 22)
Scans for DAB stations or FM stations that support
RDS.
H
BAND button (15, 19)
Selects AM, FM, or DAB*.
I
DISPLAY button (20)
Used to change the information shown on the dis-
play.
J
DIMMER button (15)
Adjusts the display brightness.
K
ENT and ENTER buttons (20, 21, 23, 24)
Used to confirm various functions and settings.
L
SETUP button (20, 23, 24)
Selects Setup mode.
M
TUNING/CH [ ]/[ ] buttons (15, 19)
With AM and FM, these buttons are used for tuning.
With DAB, they're used to select stations.
N
TUNING MODE button (15)
Selects the Auto or Manual Tuning mode for AM
and FM radio.
*DAB requires C-DAB tuner board.