Package Contents; Using The Included Floor Pads For Speakers; Using The Remote Controller; Replacing The Battery - Onkyo CR-245BT Instruction Manual

E39_CS-355_En_120614.book 6 ページ ２０１２年６月１４日 木曜日 午後１時４８分

Package Contents

Make sure you have the following items:
CR-245BT
Remote controller (RC-854C)
Indoor FM antenna
AM loop antenna
Power cord
(Connector type varies from country to country.)
Speakers (D-T05)
Speaker cables
8 floor pads
* In catalogs and on packaging, the letter at the end of
the product name indicates the color. Specifications
and operation are the same regardless of color.
Using the Included Floor Pads for
speakers
You can improve the sound quality by attaching the
included floor pads to raise the speakers off the surface
and reduce the contact area. The floor pads also make
the speakers stable and prevent them from slipping.

Using the Remote Controller

Remove the plastic film before using the remote
controller.
6
Floor pads
Bottom
D-T05
When using the remote controller, point it toward the
CD receiver's remote control sensor, as shown below.
Remote control sensor
30°
30°

Replacing the Battery

Use only a battery of the same type (CR2025).
Firmly insert a thin stick or similar
object into the hole, and pull out
firmly in the direction of the arrow.
Positive ⊕ side
Note:
• If the remote controller doesn't work reliably, try
replacing the batteries.
• If you intend not to use the remote controller for a long
time, remove the batteries to prevent damage from
leakage or corrosion.
• Expired batteries should be removed as soon as
possible to prevent damage from leakage or corrosion.
Caution:
• Replacing the battery incorrectly may cause an
explosion. Use only a battery of the same type or an
equivalent.
CR-245BT
Back side