Mission Critical Wireless - Bluetooth; Turning The Bluetooth On; Turning The Bluetooth Off - Motorola APX 3000 User Manual

Mission Critical Wireless
®
- Bluetooth
Note: The use of this feature requires the Bluetooth Software.
This feature allows your radio to extend its functionality by
connecting to external proprietary Motorola Accessories.
Note: It is recommended to use Motorola proprietary MCW
devices with APX radios during Mission Critical
operations as other Bluetooth devices may or may not
meet the mission critical standard.
The default setting for a Bluetooth-enabled radio is Bluetooth
ON. See Turning the Bluetooth Off on page 54 to turn the
Bluetooth OFF.
Note: Your radio must be preprogrammed by qualified
technician to enable this feature.
Currently your radio supports the following Bluetooth devices or
profiles.
•
Headset (HSP)
•
Dial Up Networking (DUN)
•
Personal Area Networking (PAN)
•
Serial Port (SPP)
54
English
-†‡


Turning the Bluetooth On

Procedure:
1
Press the preprogrammed button to turn the Bluetooth on.
2
Blue LED blinks three times and a short, medium-pitched
tone sounds. The display shows momentary BT ON, and
appears to indicate Bluetooth is on.
OR
Blue LED blinks three times and lights up solid blue. The
display shows BT ON FL to indicate Bluetooth has failed to
launch.
The Bluetooth can be preprogrammed to always ON if you need
to use Bluetooth most of the time. Check with the qualified
technician if this is suitable with your needs.


Turning the Bluetooth Off

Procedure:
1
Press the preprogrammed button to turn the Bluetooth off.
2
The Blue LED blinks three times, a short, medium-pitched
tone sounds. The display shows momentary BT OFF, and
disappears.
b
b