Helpful Tips; Troubleshooting - Motorola APX 3000 User Manual

Helpful Tips

Take a moment to review the following:
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 68
Caring for Your Radio . . . . . . . . . . . . . . . . . . . . . . . . . page 69
Cleaning Your Radio . . . . . . . . . . . . . . . . . . . . . . . . page 70
Handling Your Radio . . . . . . . . . . . . . . . . . . . . . . . . page 70
Servicing Your Radio . . . . . . . . . . . . . . . . . . . . . . . . page 71
Taking Care of the Battery†‡. . . . . . . . . . . . . . . . . . . . page 71
Checking the Battery Charge Status . . . . . . . . . . . . page 71
Battery Recycling and Disposal. . . . . . . . . . . . . . . . page 72
68
English

Troubleshooting

Scenario
LED indicator on The radio might be preprogrammed in
the radio is not lights off mode in the current channel.
functioning during For covert operation, the LEDs can be
transmit and preprogrammed to turn off with specific
receive or any zones or channels. It is hence
other operation recommended to add key words like
Lights off or Lights on to the zone or
channel Voice Announcements.
No LED feedback First, check your battery by docking it into
upon turning on the charger. If the battery is good, it might
your radio via on/ be the reason that the radio was turned
off switch off at a preprogrammed zone/channel
which the LED lights would not be shown
for covert operation. Change to a zone/
channel that LED lights are enabled.
Meanwhile, ensure you connect an audio
accessory to hear the audio alerts or
transmission.
Cannot connect Check the accessory battery and ensure
with the Bluetooth the battery is still good. Also check the
accessory accessory device is in the pairing mode.
Note: No LED indication occurs when your radio receives a
clear (non-secured) transmission in trunking Mode.
Solution