Pre-Alert Timer; Post-Alert Timer; Alerting Tones When Man Down Feature Is Triggered - Motorola APX 3000 User Manual

•
Pressing a preprogrammed Clear button to stops and resets
the timers. The timers do not restart until your radio is
repositioned.
Note: Emergency must be set up for this feature to operate.
For details on operating the Emergency alerts, please
see Emergency Operation†‡ on page 40.
If your radio is preprogrammed to horizontal only, it
must be worn in a vertical position otherwise the Man
Down alert may be inadvertently triggered.
When your radio is programmed with Man Down
feature, special care is required when charging your
radio with a wall mounted charger. See Handling
Your Radio on page 70 for details.


Pre-Alert Timer

This timer sets the amount of time that a Man Down condition
must be present before your are warned of the Man Down
condition.
When your radio detects that it has returned to the vertical
position or when your radio detects motion, the Pre-Alert timer
stops and is reset.
The Pre-Alert timer reinitiates when your radio detects it is in the
horizontal position or motionless again.


Post-Alert Timer

This timer sets the amount of time your radio needs to remain in
the Man Down condition before the Emergency alarm is
transmitted. When the Post-Alert Timer is initiated, your radio
alerts you with an audible tone and displays the "MAN-DOWN"
text.
See Exiting Man Down Feature on page 47 to exit Man Down
feature.

Alerting Tones When Man Down Feature is
Triggered
The Man Down alert tone volume is directly related to your
radio's volume. Ensure that your radio's volume is loud enough
so that you do not miss the Post-Alert tone.
Note: If your radio is programmed with Silent Emergency,
your radio inhibits the alert tone and visual alert
associated with the emergency feature.
Note: If your radio is programmed in Surveillance Mode, your
radio inhibits all tones and lights on your radio
including the Man Down tones.
45
English