Remove The Cushion For Rear Access - Toro GrandStand 74567TE Operator's Manual

Figure 33
1. Remove battery
Remove the Cushion for Rear
Access
The cushion can be removed for rear access to the
machine for maintenance or adjustment.
1. Lower the platform.
2. Remove the cotter pins on each side of the cushion.
3. Slide the cushion to the side to remove it from the
pins and plastic bushings on both sides.
4. Lower the cushion to the platform.
5. Perform any maintenance or adjustment on the
machine.
6. Install the plastic bushings onto the pins (Figure 34).
7. Raise the cushion and slide it onto the pins on both
sides of the machine.
8. Slide the plastic bushings into the cushion bracket
and secure them with a cotter pin (Figure 34).
2. With two people, lift the
front end of the mower
(ensure the platform is up)
1. Pin
2. Cushion bracket
28
Figure 34
3. Cotter pin
4. Plastic bushing