Toro Mower Safety - Toro GrandStand 74567TE Operator's Manual

– disengage the power take-off and lower the
attachments.
– change into neutral and set the parking brake.
– stop the engine and remove the key.
Maintenance and Storage
• Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition.
• Do not use pressure cleaning equipment on machine.
• Never store the equipment with gasoline in the tank
and inside a building where fumes can reach an open
flame or spark.
• Allow the engine to cool before storing in any
enclosure.
• To reduce the fire hazard, keep the engine, silencer,
battery compartment and gasoline storage free of
grass, leaves, or excessive grease.
• Check grass catcher components and the discharge
guard frequently and replace with manufacturer's
recommended parts, when necessary.
• Replace worn or damaged parts for safety.
• Replace faulty silencers.
• If the fuel tank has to be drained, do this outdoors.
• Do not change the engine governor settings or
overspeed the engine. Operating an engine at
excessive speed can increase the hazard of personal
injury.
• On multibladed lawn mowers, take care as rotating
one blade may cause others to rotate.
• Be careful during adjustment of the lawn mower to
prevent entrapment of the fingers between moving
blades and fixed parts of the lawn mower.
• To ensure the best performance and safety,
purchase only genuine Toro replacement parts
and accessories. Do not use will fit parts and
accessories; they may cause a safety hazard.

Toro Mower Safety

The following list contains safety information specific
to Toro products and other safety information you must
know.
This product is capable of amputating hands and
feet and throwing objects. Always follow all safety
instructions to avoid serious injury or death.
This product is designed for cutting and recycling grass
or, when equipped with a grass bagger, for catching
cut grass. Any use for purposes other than these could
prove dangerous to user and bystanders.
General Operation
• Be sure the area is clear of other people before
mowing. Stop the machine if anyone enters the area.
• Do not touch equipment or attachment parts which
may be hot from operation. Allow to cool before
attempting to maintain, adjust or service.
• Use only Toro approved attachments. Warranty may
be voided if used with unapproved attachments.
• Check carefully for overhead clearances (i.e.
branches, doorways, electrical wires) before
operating under any objects and do not contact
them.
• Slow down before making turns and use extra
caution.
• Use caution when riding the platform over curbs,
rocks, roots, or other obstructions.
• Look behind and down before backing up to be sure
of a clear path. Use extra care when operation in
reverse.
• Never jerk the controls; use a steady motion.
• Do not carry passengers.
Slope Operation
All slopes and ramps require extra caution. If you feel
uneasy on a slope, do not mow it.
• Remove obstacles such as rocks, tree limbs, etc. from
the mowing area.
• Watch for holes, ruts or bumps. Tall grass can hide
obstacles.
• Use caution near drop-offs, ditches, or embankments.
The machine could suddenly turn over if a wheel
goes over the edge of a cliff or ditch, or if an edge
caves in.
• Use extra care with grass catchers or other
attachments. These can change the stability of the
machine.
• Keep all movement on slopes slow and gradual. Do
not make sudden changes in speed or direction.
• Mow slopes side to side.
Service
• Never store the machine or fuel container inside
where there is an open flame, such as near a water
heater or furnace.
• Keep nuts and bolts tight, especially the blade
attachment bolts. Keep equipment in good
condition.
5