Product Overview; Controls - Toro GrandStand 74567TE Operator's Manual

1. Warning—read the Operator's Manual.
2. Warning—do not operate this machine unless you are trained. 6. Warning—engage the parking brake, stop the engine
3. Thrown object hazard—keep deflector in place.
4. Cutting, dismemberment hazard of hand or foot—stay away
from moving parts and keep all guards and shields in place.

Product Overview

1. Side discharge chute
2. Battery
3. Engine
4. Fuel shut-off valve
5. Fuel tank

6. Controls

Controls
Become familiar with all the controls (Figure 4) before
you start the engine and operate the machine.
Figure 3
7. Control levers
8. Operator's Manual tube
9. Platform (down position)
10. Hydraulic tank
11. Mower deck
12. Front caster wheel
117–3626
5. Thrown object hazard—keep bystanders a safe distance from
the machine.
and remove the spark plug wire before performing any
maintenance on the machine.
7. Warning—engage the parking brake and stop the engine
before leaving the machine.
8. Sliding and loss of control hazard—do not operate the
machine near drop-offs or water; keep a safe distance from
drop-offs.
1. Parking brake lever
2. Choke
3. Ignition switch
4. Fuel guage
5. Speed control lever
6. Blade control switch (PTO) 13. Left motion control lever
7. Throttle control
Hour Meter
The hour meter records the number of hours the engine
has operated. It operates when the engine is running.
Use these times for scheduling regular maintenance
(Figure 5).
Fuel Gauge
The fuel gauge is located on the top left side of the tank
(Figure 4).
11
Figure 4
8. Height-of-cut lever
9. Fuel cap
10. Height-of-cut pin
11. Platform latch
12. Right motion control lever