Adjusting the Mowing Speed
The mow speed is set to 3.8 mph at the factory.
The forward moving speed can be adjusted from 0 to 8 km/h
(0 to 5 mph).
1. Loosen the jam nut on the trunnion bolt
2. Loosen the nut securing the lock and mow brackets
on the pedal pivot.
3
Figure 48
1. Jam nut
2. Nut
3. Rotate the trunnion bolt clockwise to reduce the
mowing speed and counterclockwise to increase the
mowing speed.
4. Tighten the jam nut on the trunnion bolt and the nut
on the pedal pivot to lock the adjustment
Check the adjustment and adjust as required.
(Figure
48).
2
1
g014625
3. Trunnion bolt
(Figure
48).
Brake Maintenance
Adjusting the Brakes
If the brake fails to hold the machine while parked, you can
adjust the brakes using the bulkhead fitting near the brake
drum; contact your Authorized Service Distributor or refer to
the Service Manual for more information.
Note: Burnish the brakes annually; refer to
Machine (page
23).
38
Breaking in the