Erreka BUL BL33 Quick Installation And Programming Manual

BUL
Quick installation and programming guide
This quick guide is a summary of the complete installation manual. The manual contains safety warnings
IMPORTANT and other explanations which must be taken into account. The installation manual can be downloaded
NOTE by going to the "Downloads" section of Erreka website:
http://www.erreka.com/Automatismos/descargaDocumentos.aspx
MOTOR
2
2x1mm
ENCODER
2
2x0,5mm
8m
Electrical cabling
A: Main power supply
B: Flashing light
C: Photocells (Tx/Rx)
D: Pushbutton or key switch
E: Operator (motor + encoder)
F: Antenna

The optional NBULR kit is available for outward opening facilities; this is a special wall bracket which
allows multiple mounting positions, thus making it easier to install the operator.
800

We recommend using an electrolock for leaf lengths of over 2.5m.

Values for orientation purposes only. The shape of the leaf and the presence of strong wind may
bring notable differences in the values of the chart.
Elements of the complete installation
TC
TC
Limits on use
BL33 (short)
G187A
The TC closing stopper must be
TA
installed.
The TA opening stoppers are only
necessary in outward opening
TA
facilities.
800
MSB-017/00
E187A
BL43 (long)
3,5
G187B
9