Sending Images To A Registered Web Service - Canon POWERSHOT N2 User Manual

Previous Access Points
You can reconnect to any previous access points automatically by
following step 4 in "Using WPS-Compatible Access Points" ( = 89).
● To reconnect to the access point, confirm that the target device is
already connected to it, and then follow the procedure from step 8 in
"Using WPS-Compatible Access Points" ( = 89).
●
To switch access points, choose [Switch Network] on the screen
displayed after connection, and then either follow the procedure in
"Using WPS-Compatible Access Points" ( = 89) from step 5 or the
procedure in "Connecting to Listed Access Points" ( = 91) from step
2.
Downloaded From camera-usermanual.com Canon Manuals
Sending Images to a Registered
Web Service
Registering Web Services
Use a smartphone or computer to add to the camera Web services that
you want to use.
●
A smartphone or computer with a browser and Internet connection is
required to complete camera settings for CANON iMAGE GATEWAY
and other Web services.
●
Check the CANON iMAGE GATEWAY website for details on browser
(Microsoft Internet Explorer, etc.) requirements, including settings and
version information.
●
For information on countries and regions where CANON iMAGE
GATEWAY is available, visit the Canon website (http://www.canon.
com/cig/).
●
You must have an account with Web services other than CANON
iMAGE GATEWAY if you desire to use them. For further details, check
the websites for each Web service you want to register.
●
Separate ISP connection and access point fees may be applicable.
Registering CANON iMAGE GATEWAY
After linking the camera and CANON iMAGE GATEWAY, add CANON
iMAGE GATEWAY as a destination Web service on the camera.
1
Log in to CANON iMAGE GATEWAY
and access the camera web link
settings page.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Creative Shot Mode
3
Auto Mode / Hybrid Auto
Mode
4
Other Shooting Modes
5
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
92