Canon POWERSHOT N2 User Manual page 115

Computer Connections via a Cable
Checking Your Computer Environment
The software can be used on the following computers. For detailed
system requirements and compatibility information, including support in
new operating systems, visit the Canon website.
Windows
Operating
Windows 8/8.1
System*
Windows 7 SP1
* When sending images to a computer via Wi-Fi, check the system requirements in
"Checking Your Computer Environment" ( = 86).
● Check the Canon website for the latest system requirements,
including supported OS versions.
Installing the Software
For software installation instructions, see "Installing the Software"
( = 86).
Downloaded From camera-usermanual.com Canon Manuals
Mac OS
Mac OS X 10.9
Mac OS X 10.8
Saving Images to a Computer
Windows 7 and Mac OS X 10.8 are used here for the sake of illustration.
For other functions, refer to the help system of the relevant software
(some software excluded).
1
Connect the camera to the
computer.
●
With the camera turned off, open the
cover (1). With the smaller plug of the
USB cable in the orientation shown,
insert the plug fully into the camera
terminal (2).
●
Insert the larger plug of the USB cable
in the computer's USB port. For details
about USB connections on the computer,
refer to the computer user manual.
●
The camera is turned on automatically
when the camera is connected to the
computer.
2
Access CameraWindow.
●
Mac OS: CameraWindow is displayed
when a connection is established
between the camera and computer.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Creative Shot Mode
3
Auto Mode / Hybrid Auto
Mode
4
Other Shooting Modes
5
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
115