Canon POWERSHOT N2 User Manual page 20

Downloaded From camera-usermanual.com Canon Manuals
●
Touch [ ] and [ ] or [ ], drag the
screen vertically, and touch [ ].
● To confirm your choice, touch [OK].
●
Aim the camera at the subject. The
camera will make a slight clicking noise
as it determines the scene.
●
Icons representing the scene and image
stabilization mode are displayed in the
upper left of the screen.
●
Frames displayed around any detected
subjects indicate that they are in focus.
3
Compose the shot.
●
If the zoom ring is turned in the direction
of [ ], the subject gets larger. If the
zoom ring is turned in the direction of
[ ], the subject gets smaller.
4
Shoot.
Shooting Still Images
1) Focus.
●
Press the shutter ring lightly, halfway
down. The camera beeps twice after
focusing, and AF frames are displayed to
indicate image areas in focus.
2) Shoot.
●
Press the shutter ring all the way down.
●
As the camera shoots, a shutter sound
is played, and in low-light conditions, the
flash fires automatically.
●
Keep the camera still until the shutter
sound ends.
●
After displaying your shot, the camera will
revert to the shooting screen.
Before Use
Basic Guide
Advanced Guide
1
Camera Basics
2
Creative Shot Mode
3
Auto Mode / Hybrid Auto
Mode
4
Other Shooting Modes
5
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
Index
20