Using The Self-Timer To Avoid Camera Shake; Shooting By Touching The Screen (Touch Shutter) - Canon POWERSHOT N2 User Manual

Using the Self-Timer to Avoid Camera Shake

This option delays shutter release until about two seconds after you have
pressed the shutter ring. If the camera is unsteady while you are pressing
the shutter ring, it will not affect your shot.
Downloaded From camera-usermanual.com Canon Manuals
2
Shoot.
●
For Still Images: Press the shutter ring
halfway to focus on the subject, and then
press it all the way down.
●
For Movies: Touch [ ].
●
Once you start the self-timer, the lamp
will blink and the camera will play a self-
timer sound.
●
Two seconds before the shot, the blinking
and sound will speed up. (The lamp will
remain lit in case the flash fires.)
●
To cancel shooting after you have
triggered the self-timer, touch the screen.
●
To restore the original setting, choose [ ]
in step 1.
Still Images Movies
●
Follow step 1 in "Using the Self-Timer"
( = 40) and choose [ ].
●
Once the setting is complete, [ ] is
displayed.
●
Follow step 2 in "Using the Self-Timer"
( = 40) to shoot.

Shooting by Touching the Screen (Touch Shutter)

With this option, instead of pressing the shutter ring, you can simply touch
the screen and release your finger to shoot. The camera will focus on
subjects and adjust image brightness automatically.
1
Enable touch-shutter function.
●
Touch [
[Touch Shutter] on the [
choose [On] ( = 28).
2
Shoot.
●
Touch the subject on the screen and
release your finger immediately.
●
A shutter sound is played as the camera
shoots.
●
To cancel touch shutter, choose [Off] in
step 1.
●
Even while the shot is displayed, you can prepare for the next
shot by touching [ ].
Before Use
Basic Guide
Still Images Movies
Advanced Guide
], touch [ ], choose
] tab, and then
Index
1
Camera Basics
2
Creative Shot Mode
3
Auto Mode / Hybrid Auto
Mode
4
Other Shooting Modes
5
P Mode
6
Playback Mode
7
Wi-Fi Functions
8
Setting Menu
9
Accessories
10
Appendix
41