Input/Output Assign - Onkyo TX-NR1008 Instruction Manual

Explanatory Notes
a
Main Menu
■
b Subwoofer
c
Yes:
Select if a subwoofer is connected.
No:
Select if no subwoofer is connected.
a Menu selection
b Setting target
c Setting options (default setting underlined)

Input/Output Assign

Main Menu Input/Output Assign
Monitor Out
On the "Monitor Out" settings, you can select whether or
not to have the video sources' images output through the
HDMI output, as well as whether to have the onscreen
setup menu output through the HDMI output or through
an analog output.
If you connect your TV to HDMI output, "Monitor Out"
setting is automatically set so that the onscreen setup
menus are displayed and composite video, S-Video, and
component video sources are upconverted
Composite video, S-Video,
component video
Composite video, S-Video,
component video
If you connect your TV to the COMPONENT VIDEO
MONITOR OUT (not the HDMI output), "Monitor Out"
setting is automatically set so that the onscreen setup
menus are displayed and composite video and S-Video
sources are upconverted * and output.
Composite video, S-Video
Composite video, S-Video
Speaker Setup
* and output.
HDMI
IN
OUT
HDMI
Component video
IN
OUT
Component video
Note
• See "Video Connection Formats"
how the "Monitor Out" and "Resolution" settings
affect the video signal flow through the AV receiver.
■
Monitor Out
Analog:
Select this if your TV is connected to the COMPO-
NENT VIDEO MONITOR OUT, MONITOR OUT
S, or MONITOR OUT V.
HDMI Main:
Select this if your TV is connected to the HDMI
OUT MAIN.
HDMI Sub:
Select this if your TV is connected to the HDMI
OUT SUB.
Both:
Select this if your TVs are connected to the HDMI
OUT MAIN and HDMI OUT SUB. Video signals
are output from both HDMI outputs at the resolution
supported by both TVs.
Both(Main):
Select this if your TVs are connected to the HDMI
OUT MAIN and HDMI OUT SUB. Video signals
are output from both HDMI outputs but HDMI OUT
MAIN will become a priority; depending on the reso-
lution, video signals may not be output from HDMI
OUT SUB.
Both(Sub):
Select this if your TVs are connected to the HDMI
OUT MAIN and HDMI OUT SUB. Video signals
are output from both HDMI outputs but HDMI OUT
SUB will become a priority; depending on the reso-
lution, video signals may not be output from HDMI
OUT MAIN.
Note
• If not connected to the same output you have selected in the
"Monitor Out" setting, the "Monitor Out" setting will be auto-
matically switched to "Analog"
• When you select other than "Analog", the onscreen setup menus
are output by only the HDMI output. If you're not using the
HDMI output and select settings by mistake and the menus
disappear, press AV receiver's MONITOR OUT to select
"Analog".
• For Deep Color output, if the "Monitor Out" setting is set to
"Both(Main)" or "Both(Sub)", the number of bit may be lim-
ited due to the capability of your TV connected to a priority out-
put.
(➔ 22) for charts showing
(➔ 44)
(➔ 23).
En
43