PlasmaMade GUC 1314 Airfilter Installation And User Manual page 27

Mounting through ductwork
Mount the PlasmaMade® Airfilter through (not supplied) ductwork. The channel
adapter can be connected and bolted onto the ductwork. Use the screws 3.5x13 mm
to clamp the channel adapter to the engine case and the PlasmaMade® Airfilter.
Connect the AC adapter with the PlasmaMade® Airfilter (at the top) and the socket.
After activation of the extractor hood, the automatic operation of the filter is put in
motion.
26