D-Link DCS-5222L User Manual page 35

Section 4 - Configuration
Enable UPnP
Enabling this setting allows your camera to be
Presentation:
configured as a UPnP device on your network.
Enable
Enabling this setting allows the camera to add port
UPnP Port
forwarding entries into the router automatically
Forwarding:
on a UPnP capable network.
Enable PPPoE:
Enable this setting if your network uses PPPoE.
User Name /
Enter the username and password for your PPPoE
Password:
account. Re-enter your password in the Confirm
Password field. You may obtain this information
from your ISP.
HTTP Port:
The default port number is 80.
Access Name
The default name is video#.mjpg, where # is the
for Stream 1~3:
number of the stream.
HTTPS Port:
You may use a PC with a secure browser to connect
to the HTTPS port of the camera. The default port
number is 443.
D-Link DCS-5222L User Manual 29