Introduction - Toro 30069 Operator's Manual

This product complies with all relevant European
directives, for details please see the separate product
specific Declaration of Conformity (DOC) sheet.

Introduction

This rotary-blade, lawn mower is intended to be used
by residential homeowners or professional, hired
operators. It is designed primarily for cutting grass on
well-maintained lawns on residential or commercial
properties. It is not designed for cutting brush or for
agricultural uses.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. This manual should be considered
as part of the machine, as it contains, safety, operational
and maintenance information. The mower is a precision
built machine designed solely for cutting grass and
similar low lying ground vegetation within the limitations
stated in this manual. You are responsible for operating
the product properly and safely.
You may contact Toro directly for product and
accessory information, help finding a dealer, or to
register your product at Toro Commercial Products
Service Department Spellbrook, Bishops Stortford,
CM23 4BU, England, +44(0)1279 603019, Email:
uk.service@toro.com.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. Figure 1 and
Figure 2 identify the location of the model and serial
numbers on the product. Write the numbers in the
space provided.
1. Model and serial number location
© 2012—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Figure 1
Model No.
Serial No.
1. Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 3),
which signals a hazard that may cause serious injury
or death if you do not follow the recommended
precautions.
1. Safety alert symbol
This manual uses 2 other words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
2
Figure 2
Figure 3
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved