Specifications; Traction Unit Specifications; Attachments/Accessories - Toro 03780 Operator's Manual

To Set the Front and Rear Reel Speeds
Although the front and rear reel speeds are calculated by
inputting the number of blades, mow speed and HOC into
the InfoCenter, the setting can be manually changed to
accommodate for different mowing conditions.
•
To change the Reel Speed Settings, scroll down to the F
Reel RPM, R Reel RPM or both.
•
Press the right button to change the reel speed value. As
the speed setting is changed, the display will continue to
show the calculated reel speed based on blade count,
mow speed and HOC which was previously entered, but
the new value will also be displayed.
Stationary Regeneration
If the Stationary Regeneration icon appears on the InfoCenter,
refer to the Service Manual or contact your Toro Distributor
for the maintenance procedure.
DPF Ash Level
The DPF ash level may be checked by entering the PIN as
described in Accessing the Protected Menu Settings and
navigating to the service section.

Specifications

Note: Specifications and design are subject to change
without notice.

Traction Unit Specifications

Width of cut, 27 inch cutting
units
Width of cut, 32 inch cutting
units
Overall width, 27 inch cutting
units down
Overall width, 32 inch cutting
units down
Overall width, cutting units up
(transport)
Overall length
Height with ROPS
Track Width, front
Track Width, rear
Wheel base
Net Weight (with no cutting
units and no fluids)

Attachments/Accessories

A selection of Toro approved attachments and accessories is
available for use with the machine to enhance and expand
its capabilities. Contact your Authorized Service Dealer or
Distributor or go to www.Toro.com for a list of all approved
attachments and accessories.
28
307 cm (121 inches)
320 cm (126 inches)
345 cm (136 inches)
358 cm (141 inches)
239 cm (94 inches)
370 cm (145.8 inches)
220 cm (87 inches)
229 cm (90 inches)
141 cm (55.5 inches)
171 cm (67-1/2 inches)
1574 kg (3470 lb)