Table of Contents
Advertisement
HZ33CE/HZ30E
installation
|
42
9. Place Left Log (2 ) match pin landing on Log 2 with pin on Log 1, the
bottom should rest on the glass as shown below.
HZ33CE shown - Left Log (2) positioned to rest on Log 1 and
10. Adjust position of Log 4 – log should sit as shown below, 14" from
the left outside of the burner tray.
14"
11. Position Log 3, line up bottom pin landing on Log 3 with pin on
Log 1. The remainder of Log 3 will rest on the burner tray.
1
5
2
12. Place lava embers/rocks on glass - ensure rocks do not block pilot.
Do not place lava rocks/embers too close to logs as this may cause
carboning.
13. Adjust aeration, see unit manual for setting.
42 |
®
Horizon
HZ33CE-10 Gas Fireplace
919-265a
HZ33CE use bottom
2
pin landing
1
glass crystals.
1
2
4
HZ33CE use
bottom pin
landing
4
HZ33CE shown - Final Install
3
2
06.10.14
Advertisement
Table of Contents
