Body Solid SAB500 Assembly Instructions And Owner's Manual page 14

S T E P
3
Be careful to assemble all components
in the sequence they are presented.
NOTE:
Finger tighten all hardware first in this step. Wrench tighten ALL hardware at the end of
and after STEP 3B. Some components may be pre-assembled. Nylon lock nuts will not
fully screw onto bolts, they must be wrench tighten to fully go on.
3A. Attach Head Rest Pad (#29) to Top Frame (F) using:
2 - (#5) M8x25mm Button Head Cap Screw
2 - (#9) M8 Flat Washer
2 - (#10) M8 Lock Washer
3B. Attach Back Rest Pad (#30) to Top Frame (F) using:
6 - (#5) M8x25mm Button Head Cap Screw
6 - (#9) M8 Flat Washer
6 - (#10) M8 Lock Washer
14