Ptz Settings - Bosch MIC-71 series Operation Manual

MIC IP starlight 7000 HD, MIC IP
dynamic 7000 HD
IR focus correction
Optimizes the focus for IR lighting. Options are: On, Off (default).
Auto iris
Automatically adjusts the lens to allow the correct illumination of the camera sensor. This type
of lens is recommended for use where there are low light or changing light conditions.
–
–
Auto iris level
Increases or decreases brightness according to the amount of light. Type a value between 1
and 15.
Maximum zoom speed
Controls the zoom speed.
Zoom limit
Select the appropriate limit for zooming the camera: 20x, 30x.
Digital zoom
Digital zoom is a method of decreasing (narrowing) the apparent angle of view of a digital
video image. It is accomplished electronically, without any adjustment of the camera's optics,
and no optical resolution is gained in the process. Select Off to disable or Standard to enable
this feature. The default setting is Standard.
6.8

PTZ Settings

Auto pan speed
Continuously pans the camera at a speed between right and left limit settings. Type a value
between 1 and 60 (expressed in degrees), inclusive. The default setting is 30.
Inactivity
Selects the time period the dome must be not controlled until the inactivity event will be
executed.
–
–
–
Inactivity period
Determines the behavior of the dome when the control for dome is inactive. Select a time
period from the pull-down list (3 sec. - 10 min.). The default setting is 2 minutes.
Auto pivot
The Auto pivot tilts the camera through the vertical position as the camera is rotated to
maintain the correct orientation of the image. Set the Auto Pivot to On (default) to
automatically rotate the camera 180º when following a subject traveling directly beneath the
camera. To disable this feature, click Off.
Freeze frame
Select On to freeze the image while the camera moves to a predetermined scene position.
Max. PT speed [%]
Sets the maximum pan/tilt speed (in percent). Settings range from 1 to 100. The default is
100.
Bosch Security Systems
Constant (default): camera constantly adjusts to varying light conditions (default).
If you select this option, the camera makes the following changes automatically:
– Gain Control: switches to AGC.
– Shutter Speed: switches to default.
Manual: camera must be manually adjusted to compensate for varying light conditions.
Off (default): camera remains on a current scene indefinitely.
Scene 1: camera returns to Preset 1.
Previous Aux: camera returns to the previous activity.
Operation Manual
Camera | en 27
2016.02 | 4.0 |